Description
Description
Notes:
1. Contains pressurized flammable gases, please keep away from children;
2. Do not puncture or throw the lighter, do not throw it into the fire;
3. Please use in a ventilated environment and pay attention to flammable materials;
4. The direction of the fire head is strictly prohibited from facing the face, skin, clothing and other flammable substances to avoid danger;
5. When igniting, please identify the position of the ignition port and press the ignition button moderately. Different styles of lighters use different ignition methods;
6. When using, if cigarette ash or other debris accidentally falls into the fire outlet, it is necessary to blow air vigorously in a timely manner to remove the debris, otherwise it may cause poor ignition;
7. Langsheng, grinding wheel, and gasoline lighter, as soon as the hood is opened, gas begins to escape. Therefore, when not ignited, please make sure to tightly cover the hood for storage;
8. This product is not suitable for lighting. Please do not burn continuously for more than 1 minute to avoid skin burns caused by high temperatures;
9. Please do not expose the lighter to high temperatures (50 degrees Celsius/122 degrees Fahrenheit) for extended periods of time, and avoid direct sunlight for extended periods of time, such as around stoves, enclosed unmanned outdoor carriages, and trunk;
10. Due to the limitations of the climate in areas above 3000 meters on combustion conditions, the ignition performance of windproof and direct impact lighters will be greatly affected. It is recommended to use an open flame lighter at this time;
11. When using desktop and other handicraft lighters, the positions of the seven ignition outlets, the press button, the air inlet, and the flame regulator should be clearly defined to ensure correct use;
12. Qualified butane gas should be used, as inferior gas may damage the lighter or reduce its service life.
Adjust the flame:
1. When using, as the gas content of the product decreases and the ambient temperature changes, the flame height will change to a certain extent. This is a normal phenomenon, and you can adjust the flame height moderately;
2. When in use, the normal flame height should be adjusted to:
Windproof and direct impact lighters are 1.5-2.5 centimeters long; Luminous, gasoline, and open flame lighters are 2.5-4.0 centimeters long;
3. If it is necessary to adjust the flame height, please use a flat screwdriver to align with the groove of the flame regulator; If the lighter itself is equipped with an adjustment ring, you can directly adjust it with your fingers to rotate clockwise in the direction of the (-) arrow, which can lower the flame height;
Turning counterclockwise in the direction of the (+) arrow can increase the flame height.
4. Gasoline lighters should control the flame height by adjusting the height of the ignition wick. If the flame height is too high, a small amount of the wick can be cut off with scissors;
If the flame height is too low, the wick can be pulled out appropriately.
Gas filling method
1. When refueling, there must be no sparks or sparks around to ensure safety. Do not add air while smoking;
2. Qualified butane gas should be used, as inferior gas may damage the lighter or reduce its service life;
3. When adding gas to a regular model, please stand the lighter upside down, align the gas bottle and cover the lighter’s air inlet. Apply pressure several times, each time for about 2 seconds; If the gas cannot be filled, it may be due to excess air remaining in the gas box. At this time, you can release the gas vertically. Use a small screwdriver to align with the air inlet and quickly release the gas 1-2 times, then perform the filling operation upside down;
4. When refueling with gasoline, the hood should be opened, the movement should be pulled out and reversed, the outer sponge should be lifted and an appropriate amount of gasoline should be added. After the gasoline seeps into the inner cotton, the outer sponge should be covered and then inserted into the casing;
5. After refueling various types of lighters, wait for at least one minute to adjust the temperature of the newly filled gas to room temperature, and wait for the residual gas attached to the surface of the lighter to evaporate completely before ignition. If ignition operation is carried out immediately at this time, it may cause residual gas on the surface of the lighter to ignite, causing unnecessary danger. After replenishing the gas, if the flame height is too high or too low during use, it is a normal phenomenon, and the flame height can be adjusted moderately
